Oase Pondovac range

Availability:

10 in stock


Compare

Oase Pondovac range for pond cleanliness!

£174.99£619.99

Clear

Oase Pondovac range

Oxygen is not just in demand above the water surface. It also fulfills important tasks in the water. Fish require oxygen to breath and micro-organisms require oxygen to clean the water. This is why it is especially important to ensure adequate oxygen. Dead plants and fish waste settle on the floor as pond silt and bind oxygen. Moreover, foul odours or even pathogens can form. To keep your pond in top condition throughout the year we recommend suctioning out the floor silt before it can burden the water. The PondoVac series pond vacuums are optimally suited in this regard, and your pond will thank you with healthy, clear water.

Pondovac Classic

Sucks up sludge and collects it in a tank. Automatically turns off and empties when full. When it has emptied it turns back on again and the cycle repeats.

Features:

Maximum suction depth of 2m
2m discharge hose – 4m suction hose
Removes solids up to 10mm
4 nozzles
Comes with a debris collection bag
Nozzle heads included:

String algae nozzle for removal of blanketweed and algae
Crevice tool nozzle for getting inbetween rocks and crevices
Wide flat nozzle for removing sludge and fine sediment
Adjustable floor nozzle for removing general coarser debris up to 10mm in diameter
Dimensions – Length 400mm, Width 400mm, Height 620mm

2 Year Oase Guarantee

Pondovac 4

  • Vacuum non stop thanks to the patented two chamber system – simultaneous vacuuming and emptying of the tank
  • Maximum suction depth of 2.4 m thanks to high performance 1,700 W motor with optimised blade geometry
  • Can be used for cleaning garden ponds, pools and swim ponds as well as a wet vacuum in the household
  • Transparent suction tube for flow through control
  • PondoVac 4 is easy to move with transport rollers and adjustable handle
  • Hand regulator for adjusting the suction power
  • Included in the scope of delivery: Four robust aluminium tubes, special string algae nozzle, broadened universal nozzle, area nozzle, wet suction brush, brush nozzle, debris collection bag, 5 m long suction hose and 2.5 long discharge hose.
  • Suction capacity up to 83 l/min, depending on the implementation conditions

Dual-chamber system

Two same-size cylinders are filled and emptied in alternating cycles. Thus, non-stop vacuuming is enabled.

Hand regulator

For adjusting the suction power, for example in shallow water. Likewise, it also enables intermittent back flushing of clogged nozzles.

Aluminium suction tubes

Everything is under control thanks to torsion-resistant aluminium suction tube. You can exert more pressure, especially when using the brush nozzles.

Handle, transport rollers + suction tube receptacle

Fast and convenient transport to the pond site via the adjustable and ergonomic handle.

Debris collection bag

Ideal for returning cleaned water when suctioning larger particles > 1 mm – not suitable for pond silt.

Recommendation

High-power suction to a depth of 2 m

Dimensions (L x W x H) mm 435 x 395 x 670
Rated voltage 230 V / 50 Hz
Power consumption W 1700
Power cable length m 4.00
Net weight kg 13.80
Guarantee (+ request guarantee) Years 2 + 1
Suction depth max. m 2.40
Max. flow rate l/h 5000
Length, suction hose m 5.00
Length, discharge hose m 2.50

PondoVac 5

  • Vacuum without interruption thanks to integrated emptying pump
  • Flexible use – waste water can be diverted in any direction.
  • Pumps the waste water even over height differentials
  • Maximum suction depth of 2.5 m thanks to high performance 1700 W motor with optimised blade geometry
  • Can be used for cleaning garden ponds, pools and swim ponds as well as a wet vacuum in the household
  • Transparent suction tube for flow through control
  • Easy to move with transport rollers and adjustable handle
  • More ground clearance and silent tyres in Big Wheel design
  • Hand regulator for adjusting the suction power
  • Discharge hose with C-connection on both sides
  • Included in the scope of delivery: Four robust aluminium tubes, special string algae nozzle, broadened universal nozzle, area nozzle, wet suction brush, brush nozzle, debris collection bag, 5 m long suction hose and 2.5 long discharge hose.

Dirty water pump

The container is emptied via an integrated silt pump. Thus the wastewater can be flexibly diverted.

Hand regulator

For adjusting the suction power, for example in shallow water. Likewise, it also enables intermittent back flushing of clogged nozzles.

Drain with C-connection

On the pressure side, the PondoVac 5 has plastic C-connection for the discharge hose – reliable and sealed.

Pre-filter bags

Larger particles such as pebbles or leaves are retained in the tank. Emptying occurs with convenience via zipper. For retention of smaller particles > 1 mm an additional fine filter sack is included for the outlet – not suitable for pond silt.

Big Wheel chassis

Special large wheels (155 mm) ensure suitability for rough terrain. The extremely quiet tyres are specially designed for low-noise whilst in operation

Dimensions (L x W x H) mm 436 x 425 x 716
Rated voltage 230 V / 50 Hz
Power consumption W 1700
Power consumption pump W 900
Power cable length m 7.50
Net weight kg 24.40
Guarantee (+ request guarantee) Years 2 + 1
Suction depth max. m 2.50
Max. flow rate l/h 8000
Length, suction hose m 5.00
Length, discharge hose m 10.00
Floating hose application 38 mm
SKU: N/A Category: Tags: , , ,
Weight 9.5 kg
Model

Pondovac Classic, Pondovac 4, Pondovac 5